CBP59系列正壓型防爆配電柜（P）

 適用范圍  

1區、2區危險場所。                                        

ⅡA、ⅡB類爆炸性氣體環境。

注：要求IIC類時注明.

 

產品特點

  產品采用GGD配用柜柜架,采用主、副盤結構，整柜包括通風系統，檢壓傳感系統，自動控制系統，換氣系統，測量系統及電氣系統。產品內部可裝檢測儀表，分析儀表，顯示儀 表，低壓電表，變頻器、軟起動器或計算機系統，可作為中央信號處理系統及中央控制系統。保護裝置安全，控制柜設有換氣送電聯鎖裝置，只有達到規定的換氣時間后，方能自動傳送電源，并有低壓自動報警及自動補氣裝置，高壓自動化關氣功能。密封性能可靠，殼體采用多重密封防護，保壓時間長，節約運行費用。本柜采用電纜溝座安裝形式，用戶需配備潔凈或惰性氣體起源。可多臺并排安裝，聯機運行。制造時、用戶須提供完整的電氣系統圖，控制系統內裝材料清單。

符合GB3836-2000，IEC60079標準要求

 

 

Application

Can be used in Zone 1 and Zone 2 dangerous places.     

Can be used in IIA、IIB、group explosive atmosphere.

Notice:Please note if need IIC grade needed.

 

 Featrues

   Adoptong GGD frame and structure of main panel and auxiliary panel.The tank consists of ventilation system,sense system, selt-control system,gas-changable system,metering system and electric system.metering system and electric system.

It can inner-istall inspecting instrument,analysis instrument,indicator low-voltage apparatus,ttansducer,soft starter or   computer control system,The tank can be used as center signal disosal system and center control system.Full proection devices.Inside is arranged the inter locks of changing gas and transmitting electricity.Only reaching to specified time to chamge gas,it can transmit eletricity.And it provides fun ctions of low-voltage automatic alarming,self-charging gas ctions of low-voltage automatic

alarming,self-charging gas and high-pressure self-closing.High security of sealing with multi-layer seals,long time to last and operating cost to save.It adopts mounting mode of cable clitch-basing,User must prepare prue gas or inert gas. Multi-tanks to mount,online to operate User must provide integrted electric system drawing and listing of inner-stuffin control system when the tank is being manufactured.

 

Suitable for GB3836-2000,IEC60079 standard request.