概述
雙齒輥破碎機適用于抗壓強度小于240Mpa，濕度小于35%的中硬及軟物料的中碎和精碎作業，如煤、焦炭、石油焦、生石灰、硅石、碳素、玻璃管、瀝青、化工原料等或與以上硬度相當?shù)墓腆w物產，本機器具有使用維修費特低、性能可靠、粉塵少、噪音低等特點。
雙齒輥破碎機配置兩個碾輥，輥面分為狼牙齒、環形齒、直條齒、大板齒等，適用于進料粒度小于1000mm，成品粒度要求10-200mm，要求粉末狀少、顆粒多的中碎或精碎場合。
如用于熱電廠、焦化廠破碎電煤；煤礦破碎大塊原煤；鋼鐵行業破碎焦炭；煤化工行業破碎石油焦；電子行業破碎硅石；碳素行業破碎碳素塊；太陽能行業破碎玻璃管；混凝土行業破碎生石灰和瀝青等；或者與上述類似的破碎場合。
Summarize
Double teeth roll crusher suitable for compression strength less than 240Mpa,humidity less than 35% of the hard and soft materials,primary operations in the intermediate and coarse crushing.Such as coal,coke petroleum coke,lime,silica,carbon,glass,asphalt,chemical raw materials or solid material with similar hardness.Features: low use and maintenance costs,high reliability,low dust,low noise.
Double-teeth roll crusher has two abrasive rolls.The roll surface is divided into wolf teeth,ring teeth,straight strip teeth,big board teeth and others.Maximum feeding 1000mm,range of the discharge 10-200mm.operations in the intermediate and coarse crushing which has few powder and lots of grains.
Such as for thermal power plants,coking plant crushing coal;breakingraw coal of coal mine;steel industry breakingcoke;petroleum coke breaking in coal chemical industryelectronics industry breaking silica;carbon industry crushing carbon block solar industry breaking waste glass;Concrete industry crushing lime and asphalt;or in the simiar occasions.
2PG Series Double teeth roll crusher
工作原理
雙齒碾破碎機是利用兩個耐磨合金齒輥，相對旋轉產生的高擠壓力和剪切力來破碎物料，物料進入兩齒輥間隙（V型破碎腔）以后，受到兩齒輥相對旋轉的擠壓力和剪切力作用，來擠軋，剪切和嚙磨下，將物料破碎成需要的粒度然后從排料口排出。
Working principle
Double-teeth roll crusher is fixed with two wear-resistant alloy rolls.Their relative rotation generates high extrusion pressure which crushes the material.The material enters into the spacebetween the two rolls,suffered both extrusion and shear force.In the crowd rollig,cutting and grinding,it is crushed into the required size and then sent by the transport equipment.
主要技術參數/Specifications
|
序號 Serial number |
規格型號 Model |
進料粒度 (mm) Feed size |
出料粒度 （可調mm） Discharge size(adjustable) |
生產能力 （t/h） Output |
電機功率 （kw） Power |
保護方式 Protection mode |
傳動方式 Driving mode |
|
1 |
2PG0404 |
＜120 |
10-50 |
6-40 |
7.5×2 |
彈簧或液壓 Spring or Hydraulic pressure |
三角帶或聯軸器 Triangular blet or Shaft coupling |
|
2 |
2PG0605 |
＜200 |
10-70 |
10-80 |
15×2 |
||
|
3 |
2PG0806 |
＜300 |
10-90 |
20-150 |
18.5×2 |
||
|
4 |
2PG1008 |
＜400 |
10-110 |
30-200 |
22×2 |
||
|
5 |
2PG0812 |
＜300 |
10-90 |
40-280 |
30×2 |
||
|
6 |
2PG1012 |
＜400 |
10-110 |
50-350 |
37×2 |
||
|
7 |
2PG1212 |
＜700 |
10-140 |
65-450 |
45×2 |
||
|
8 |
2PG1612 |
＜1000 |
10-180 |
80-600 |
90×2 |
||
|
9 |
2PG1618 |
＜1000 |
10-200 |
90-780 |
110×2 |
