產品規格： 1本書  價格： 380元

產品介紹：ANSI/ASQ Z1.4-2003: Sampling Procedures and Tables for Inspection by Attributes

★ ANSI/ASQC Z1.4-2003抽樣標準

MIL-STD-105E是世界上應用最普及的抽樣標準,亦是105D的最新版本

1995年，美國軍方宣布取消MIL-STD-105E，以美國國家標準ANSI/ASQC Z1.4-1993代替MIL-STD-105E; 2003年，ASQ（美國質量協會）對ANSI/ASQC Z1.4-1993進行了修訂，發布了2003年版美國國家標準。

ANSI/ASQ Z1.4-2003。ANSI/ASQ Z1.4-2003 Sampling Procedures and Tables for Inspection by Attributes is an acceptance sampling system to be used with switching rules on a continuing stream of lots for Acceptance Quality Limit (AQL) specified. It provides tightened, normal, and reduced plans to be applied for attributes inspection for percent nonconforming or nonconformities per 100 units.

★ ANSI/ASQ Z1.4-2003 replaces ANSI/ASQC Z1.4-1993.

Both ANSI/ASQ Z1.4 “Sampling Procedures and Tables for Inspection by Attributes” (item# T004 and T004E) and ANSI/ASQ Z1.9 “Sampling Procedures and Tables for Inspection by Variables for Percent Nonconforming” (item# T009 and T009E) are to be used with a continuous supply. ANSI/ASQ Z1.4 is to be used with go/no-go data (sometimes called attribute data). ANSI/ASQ Z1.9 is to be used with measurements. Also note that Z1.9 assumes a normal distribution.

★ Contents:

1 ANSI/ASQ Z1.4-2003概述

1.1 ANSI/ASQ Z1.4-2003/MIL-STD-105E的發展歷史

1.2 ANSI/ASQ Z1.4-2003換版說明

1.3 ANSI/ASQ Z1.4-2003與GB/T2828.1-2003的比較

1.4 ANSI/ASQ Z1.4-2003與MIL-STD-105E的比較

2 ANSI/ASQ Z1.4-2003使用指南

2.1 ANSI/ASQ Z1.4-2003使用條件

2.2 ANSI/ASQ Z1.4-2003抽樣檢驗的主要要素

2.3 ANSI/ASQ Z1.4-2003抽樣檢驗程序

2.4 抽樣方案的檢索

2.5 檢驗判定

2.6 ANSI/ASQ Z1.4-2003使用實例