#2200 PC臺化 高透明高強度高耐沖www.mxsujiao.com ,180 liu 2522 jing 6493 li #2200 PC臺化 高透明高強度高耐沖
臺化聚碳酸酯(PC)膠粒物性彙總表
TARFLON PC (Polycarbonate) general properties data sheet
| 項 目 Property | 試驗方法 Test Method | 單 位 Unit | #２２００ |
| 物理性質 Physical Properties | |||
密度 Density | ISO1183 | kg/m3 | 1.20× 103 |
熔融指數 (300℃, 1.2kg) | ISO1133 | cm3/10 min | 12 |
吸水率 Water adsorpton | ISO 62 | % | 0.23 |
| 機械性質 Mechanical Properties | |||
抗張強度 | ISO 527 | Mpa | 65 |
斷張強度 Tensile stress at break
| ISO 527 | Mpa | 65 |
| 斷 張率 Nominal tensile strain at break | ISO 527 | % | 95 |
張力模數 Modulus of elasticity in tensile | ISO 527 | Mpa | 2000 |
彎曲強度 Flexural strength | ISO 178 | Mpa | 90 |
| 彎曲模數 Modulus of elasticity in flexure | ISO 178 | Mpa | 2300 |
| Charpy衝擊強度 Charpy impact strength(1eA) | ISO 179 | kJ/m2 | 80 |
| I洛氏硬度 Rockwell Hardness | ISO 2039-2 | R, M-scale | R120, M50 |
| 熱學性質 Thermal Properties | |||
HDT 熱變形溫度 (18.6 kg/cm2) (1.8Mpa) | ISO 75-1 | ℃ | 125 |
| 成型收縮率 Mold Shrinkage (MD) | ASTM D 955 | % | 0.5~0.7 |
線膨脹係數 Linear expansion factor (MD) | ASTM D 696 | cm/cm/℃ | 6.5× 10-5 |
| 電氣性質 Electrical Properties | |||
絕緣強度 Dielecttric strength (1.0 mmt) | IEC60243-1 | MV/m | 30 |
體積固有阻抗 Volume resistivity | IEC60093 | Ohm × m | > 1016 |
比誘電率 Dielecttric constant (100 Hz) | IEC60250 | - | 2.91 |
比誘電率 Dielecttric strength (106 Hz) | IEC60250 | - | 2.85 |
誘電正接因子 Dielecttric dissipation factor (100 Hz) | IEC60250 | - | 6.6 × 10-4 |
誘電正接因子 Dielecttric dissipation factor (106 Hz) | IEC60250 | - | 9.2× 10-3 |
耐電弧性 Arc resistance | ASTM D 495 | sec | 110 |
| 光學性質 Optical Properties | |||
折射率 Refractive index (nD25) | ASTM D542 | - | 1.585 |
透光率 Light transmittance | ISO 13468-1 | % | 85~89 |
| 燃燒性 Flammability | |||
燃燒性 Flammability | UL-94 | File No. E238753 | V-2 (0.36mm) V-2 (1.5mm) V-2 (2.9mm) HB (3.0mm) HB (6.0mm) |
以上數值係依照ISO及ASTM試驗方法所測得，僅供選擇用途品級之參考。
