一．概要Summary
該設備適用于圓柱電池，電容器的封口，自動上料，高速旋轉封口，自動下料。
This equipment is suitable for cylindrical battery, capacitors sealing, automatic feeding, high-speed rotating sealing, automatic laying-off.
產品規格：Product specifications
電池型號 Battery type | 直徑 D | 高度 H | 厚度 T |
單位（mm） | |||
電池Battery | 30-60 | 45-80 | 0.4 |
二、工藝要求及工藝參數The requirements of process and process parameters
項目Item | 設備參數Device parameter |
效率Efficiency | 6ppm |
功率Power | ≤4KW |
1、操作要求：Operational requirements
1）可通過更換工裝模具適用于不同尺寸的產品。By replacing the tooling for the products of different sizes
2）操作調整及維護簡便安全，換型方便快捷Operation adjustment and maintenance is simple and safe, convenient and quick change type
2、使用壽命：工裝模具正常使用壽命需達到200 萬次以上。Service life: mold tooling, normal service life reached 2000000times
3、產品要求：封口處無裂紋無劃傷，且口型無不圓現象，殼身無劃傷或變形。Products: the seal no crack no scratch, and the mouth is round, shell body without scratching or deforming
4、不能損傷殼子內的極組和面蓋，密封圈不能斷裂。 Can not damage the shell inside the polar group and a surface cover, the sealing ring cannot be broken
三，現場環境要求Products using environmen
1、額定輸入電壓：220V，50 Hz；電壓波動范圍：±10%；Rated input voltage:220V, Hz,50; voltage fluctuation range: + 10%
2、現場無腐蝕氣體、液體、爆炸性氣體。Site no corrosive gas, liquid, explosive gas
3、溫度：10-40℃；Temperature:10-40C
4、相對濕度：≤80%；Relative humidity:80%;
5、氣壓： 5-6個標準氣壓；Air pressure:5-6standard pressure
