Product  name

Plastisol ink

State

Paste

Packing

25KG/drum for white, 20KG/drum for other colors

Storage

12 months in cool place

Application

1. Suitable for automatic, manual printing,  can create 3D sharp up and round up effects etc.

2. Suitable for all fabrics which endurable  in high temperature of 150-180 degree.

Features

1. High fastness

2. High glossy

3. High softness

4. SGS  detecting passed, no phthalate, no heavy metal, no NPEOs.

Mix proportion

Plastisol ink 100%, or can be intermixed  with other colored plastisol inks

Printing  process

Method 1st:

1. Printing with the clear plastisol ink  for 3~4 times (3-4 scrapes per time)

2. Printing again with colored plastisol  ink for 2 times(3-4 scrapes per time)

3. Baking for 1~3 minutes under 150~180℃  to dry it.

4. Finish.

Method 2nd:

1. Mixing clear plastisol ink 50% with  colored plastsiol ink 50%.

2. Printing for 4~5 times(3-4 scrapes per  time)

3. Baking for 1~3 minutes with 150~180℃  to dry it fast.

4. Finish.

Attentions

1. The fabric must endurable in hot  temperature, it’s not suitable for airtight fabric.

2. Thick screen is suggested for the best  effect .

3. Basement process can make better washing  ability.

品名

低溫?zé)峁逃湍?/span>（聯系人：13751205889張小姐  QQ/微信號：443462157）

制造商

幸運印花材料有限公司（廣印牌）

外觀

糊狀

包裝

白色25KG/桶，其他色20KG/桶

貯存期

常溫下12個月

應用

100%棉、棉/滌混紡、滌綸、深淺色布、牛仔布等各種織物，凡滿足以下兩點的織物均可使用：

1. 能耐120-160C；

2. 有透氣性，可以使油墨滲透進去。不適合的承印物比如：塑料、金屬、玻璃等及經防水處理的尼龍布。

賣點

1. 超強洗水牢度

2. 高亮度

3. 手感柔軟

4. 符合美國ASTM對鄰苯二甲酸脂和歐盟EN71 Part 3對重金屬含量的要求

調配比例

100%熱固油墨，或用不同顏色相互調配成其他色

工藝流程

1. 絲網選用100-120目厚板，用絲印硬方刀75度刮印, 以透明油墨打底1-2次，印第一次時用力刮4-6刀

2. 印彩色油墨2-3次（或直接印彩色油墨3-4次，不需打底）

3. 120-160焙烘過熱1-3分鐘。

注意事項

1. 打底可使彈力和牢固度更好，并節省成本

2. 每次返印前需要用熱風槍將墨層吹至表干，以免返粘網板