處理后的水質標準：The water quality standard after the treatment:
(1) 耐熱大腸桿菌群幾何平均值為不超過100個/100mL；
A geometric mean of no more than 100 thermotolerant coliforms/100ml;
(2) 懸浮固體總量幾何平均值為35 Qi/Qe mg/L；
A geometric mean of total suspended solids is 35 Qi/Qe mg/L;
(3) 5日生化需氧量（BOD5）幾何平均值為不超過25Qi/Qe mg/L；
A geometric mean of 5-day Biochermical Oxygen Demand (BOD5) of no more than
25 Qi/Qe mg/l;
(4) 化學需氧量幾何平均值為不超過125Qi/Qe mg/L；
A geometric mean ofChemical Oxygen Demand of no more than 125Qi/Qe mg/L;
(5) 排出物PH值介于6與8.5之間。
PH of the effluent is between 6 and 8.5.
(6)總氮≤20Qi/Qe mg/l或至少70%減少率；
Total Nitrogen≤20Qi/Qe mg/l or at least 70% loss;
(7)總磷≤1Qi/Qe mg/l或至少80%減少率。
Total Phosphorus≤1Qi/Qe mg/l or at least 80% loss.
本系列規格型號的技術參數如下：
The technical parameters of the specification and model of the series
型 號 Model 參 數 Parameter | WCBx -10C | WCBx -15C | WCBx -20C | WCBx -25C | WCBx -30C | WCBx -40C | WCBx -50C | WCBx -60C | WCBx -80C | WCBx -100C | WCBx -150C | WCBx -200C | WCBx -300C | WCBx -400C | WCBx -500C | WCBx -600C |
液力負荷t/d Treatment load | 0.70 | 1.05 | 1.40 | 1.75 | 2.10 | 2.80 | 3.50 | 4.20 | 5.60 | 7.0 | 10.5 | 14 | 21 | 28 | 35 | 42 |
有機負荷kg/d Organic load | 0.35 | 0.53 | 0.70 | 0.88 | 1.05 | 1.40 | 1.75 | 2.10 | 2.80 | 3.50 | 5.25 | 7.0 | 10.5 | 14 | 17.5 | 21 |
排放標準 Drain standard | BOD5≤25Qi/Qe mg/L；COD≤125Qi/Qe mg/L；TSS≤35Qi/Qe mg/L； 大腸菌群Coli group≤100/100mL；PH 6~8.5；總氮≤20Qi/Qe mg/l或至少減少70%；總磷≤1Qi/Qe mg/l或至少減少80%，無余氯 | |||||||||||||||
電 源 Power supply | 3ph/AC380/50Hz or 3ph/AC 440V/60Hz | |||||||||||||||
控制方式 Control mode | 自動/手動 Automatic/manual | |||||||||||||||
1. 工作環境Working Conditions
本裝置在下列情況下長期可靠工作：
This plant can work smoothly for a long time under the following situations:
● 環境溫度：0℃～55℃
Ambient temperature: 0℃～55℃
● 沖洗水溫度：2℃～32℃
Flushing water temperature: 2℃～32℃
● 相對濕度：不大于90％
Relative humidity: less than90％
● 鹽 度：0～35000 ppm
Salinity: 0～35000 ppm
● 傾 斜 度：22.5o（任何方向）。
Inclination: 22.5o（Any direction）.
