JULABO Thermal bath fluids are ideally suited for all of yourtemperature control applications and guarantee safe and reliableoperation. Choosing the proper bath fluid is critical for bestresults in temperature control. Viscosity, oxidationcharacteristics and heat transfer of Thermal fluids arespecifically matched with each JULABO temperature control unit.
JULABO Thermal bath fluids have been carefully selected and areoptimized for maximum performance with JULABO instruments.
Low toxicity
Low viscosity
High stability
Minimum odor
Good heat conductivity
Low corrosion tendency
Wide temperature ranges
| Working temperature (°C) | -90...+60 |
| Flash point (°C) | > +75 |
| Fire point (°C) | > +430 |
| Viscosity (kinematic at 20 °C in mm2/s) | 2 |
| Density (at 20 °C in g/cm3) | 0.873 |
| Pour point (°C) | -120 |
| Boiling point (°C) | 229 |
| Ignition temperature (°C) | 430 |
| Color | clear |
JULABO熱浴液非常適合所有的溫度控制應用，并保證安全可靠的操作。選擇合適的浴液對溫度控制的**效果至關重要。熱流體的粘度、氧化特性和傳熱特性都與每個JULABO溫度控制單元相匹配。
JULABO熱浴液經過精心挑選，并優化了JULABO儀器的*大性能。
好處
低毒性
低粘度
高穩定性
*小的氣味
良好的導熱性
低腐蝕傾向
溫度范圍寬
規范
工作溫度(°C) -90…+60
閃點(°C) > +75
火點(°C) > +430
粘度(20°C的運動，單位為mm2/s
密度(20°C時g/cm3)0.873
傾點(°C) -120
沸點(℃)229
點火溫度(°C) 430
顏色清晰
