Digital Readouts： LG10,LH30,LH51,LH70
Linear Encoders：GB-ER,GB-A,MSS-101,SD-608,SJ-300,SJ-700,SJ300A,SL-110,SL220,SL-331,SL-700,SR-118,SR-127,SR-33/34SR-801
Digital Gauges：DE-BR,DG-10B,DG-110B,DG-50BDG-805,DG-MDK-802/812,DL-B,DL-BR,DR-12N,DR-32NV,DT-512,LT-10,LT-11LT-20LY-51LY-52LY-71/72MG-SeriesMT-10U-Series
Measuring Accessories：BD-95,MD-10,MD-20A,MD-21,MJ-100,MJ-500,MJ-620,MJ-820,MJ-830,PH-100,PL-101,PL-30,PL-80,PL-81,SET-B3,SET-P15
SONY數顯表LG10系列：LG10-1、LG10-2、LG10-3
LH71A:LH71-1/LH71-2/LH71-3
以緊湊尺寸多樣的選擇，靈活對應車床用高性能顯示單元。
車床的功能
最小表示量轉換
區間誤差校正
保存數據
復位/預置
測量原點檢測單位
程序功能
縮放
車床式樣(工具)坐標/加機能
電源另售AC適配器(PSC -21)是很必要的。
LH70/71
LH70/71 Display Counter Pricing |
Model | Description | MSRP |
LH70-1 | Single Axis LH70 Display | $600.00 |
LH70-2 | Two Axis LH70 Display | $710.00 |
LH70-3 | Three Axis LH70 Display | $815.00 |
LH71-1 | Single Axis LH71 Display | $700.00 |
LH71-2 | Two Axis LH71 Display | $810.00 |
LH71-3 | Three Axis LH71 Display | $915.00 |
Display Specifications
Model Name | LH70-1 | LH70-2 | LH70-3 | LH71-1 | LH71-2 | LH71-3 |
Item |
Display Axes | 1 | 2 | 3 | 1 | 2 | 3 |
Display | 7 digits and "-" display. Amber LEDs |
Connectable measuring Units | SJ300 Series (Direct).
GB-A/SR128, PL20B, DG-B Series (Adaptors Available) |
Scale Input resolution | Basic: 0.1μm, 0.5μm, 5μm, 10μm, 1s, 10s, 1min, 10min
Expanded: 100μm, 50μm, 25μm, 20μm, 2μm, 0.05μm |
Display resolution* | Basic: The above and their diamter displays
0.000005", 0.00001", 0.00002", 0.00005", 0.0001", 0.0002", 0.0005", and their diameter displays
Expanded: The above and their diamter displays
0.000002", 0.000005", 0.00001", 0.00002", 0.00005", 0.0001", 0.0002", 0.0005", 0.001", 0.002", 0.005 and their diameter displays |
Input signal | A/B Quadrature signal, Z signal (Equivalent with RS-422) |
Mh. phase input difference | 100ns |
Alarm display | Scale disconnected / Excess speed / Data Overflow / Power failure / Error in stored data |
Preset/Recall function | 3 items |
Mulit datum point | 10 | 150 |
Tool offsets (for Lathe) | - | 12 | - | 99 |
Axis Summing | - | Same as LH71 | - | Sum of 2 axes |
Display Hold | - | Same as LH71 | - | The displayed value can be held and the datum entered |
Ref. point function | The absolute zero point can be detected and the datum point can be re-established. (Requires a scale with a reference point) |
Bolt hole circle | - | Same as LH71 | - | Input diamter, start angle, stop angle, No. of holes |
Radius cutting function | - | Same as LH71 | - | Input radius, Tool diameter, feed angle |
Data storage | Stores the value dispalyed before power loss and the last preset datum |
Max. linear error compensation | ±600μm/m |
